Tunley Pressure Treated Driveway Gate

Description

Email sizes to tom@lynxoutdoorproducts.co.uk for a quote

The Tunley Pressure Treated Driveway gate is a cost effective swept top, pressure treated driveway gate option. A quality wooden gate with an swept top and tongue & groove match boarding. Framed, ledged & braced with a 63mm section size. The Tunley Driveway gate also benefits from mortice & tenon joints and a smooth planed finish.  Made in Britian from PEFC Certified sustainable timber.

• Wood type: Softwood 
  
• Finish: Pressure treated Please be aware that small splits (shakes and checks) can occur during drying; this is nature at work and should not be considered a fault.
  
• Width: From 3′ (0.915m) up to 6′ (1.83m) per gate
  
• Height:  From 4′ (1.22m) up to 6′ (1.83m) per gate
  
• Automation: Not suitable for automation.
  
• Recommended fittings: 30″ two way adjustable hinges + Ring Latch + Drop bolt & socket set (both gates if a pair). Hinges should be a minimum of a  third of the width of the gate.
  
• Please note: As the width of the gate decreases the curve of the swept top will become more pronounced. The image below shows pairs of  gates left to right –  6′ (1.83m)* | 5′ (1.525m)* | 4′ (1.22m)* | 3′ (0.915m) wide*